MYCUT Oxy/Gas Cutting Machine
Home Products Oxy/Gas CNC Cutting Machines MYCUT Oxy/Gas Cutting Machine
RM 38800
CNC GAS/OXY CUTTTING:
This MYCUT CNC is equipped is equipped wit a CNC-enabled gas/oxy cutter that can cut from 6mm to 50mm mild steel and carbon steel. Up to 4 feet of cutting width and length, which is suitable for fabricators that frequently cuts 4' x 4' plates.
COMES WITH CNC COMPUTER SYSTEM:
This MYCUT CNC is integrated with a CNC computer system containing all the necessary software for CNC cutting, as well as CNC controller electronics needed for precise CNC motion.
HIGH UPGRADEABILITY:
This MYCUT CNC is equipped with a modular torch interface. This allows MYCUT CNC to be upgrade-able with an additional tool such as CNC plasma cutter,so it can function as both CNC plasma and CNC oxy/gas cutter. In long term, if you wish to extend the cutting length of MYCUT, simply inform us and we will supply you with the necessary parts for the cutting length upgrade. The upgradeability of this machine is very high. Of course you can also purchase a bigger cutting size in the first place so you don't have to upgrade it in the future.
ONE DAY INSTALLATION AND TRAINING INCLUDED:
Upon successful purchase of our MYCUT CNC, once the machine has been unloaded to your desired work space with all the necessary power and gas requirements fulfilled, this is what we will do:
- We will install the machine in the morning
- If the installation process is smooth, usually after lunch we can start the training.
- By the end of the day you will be able to operate the CNC cutting machine. After a week of continued practice you will be a CNC cutting expert in no time.
AFTER SALES AND SUPPORT:
Sometimes there are problems with the CNC software settings, or maybe you may have forget the steps, or there are some problem with electrical or mechanical. No worries, call our after sales support number and we will attend to you as soon as possible. The good news is up to 95% of the problems can be solved via a phone call.
Our after sales support channels:
- Via Internet Remote Computer Access
- Via Phone Calls and SMS
- Via WhatsApp
- Via On-Site
MADE IN MALAYSIA:
MYCUT CNC is proudly designed, manufactured and assembled in Selangor, Malaysia by Mach Robotics, a company that focuses on manufacturing of custom CNC cutting machines as well as CNC repair services. You will be purchasing a locally made CNC cutting machine with local after sales support.
FREQUENTLY ASKED QUESTIONS:
1. WHY USE OXY/GAS CUTTING? If you want to cut thick mild steel with less than 2 degree bevel, oxy/gas cutting is the best choice. There are also plasma cutters than can cut very thick metal, but those plasma cutters will be very expensive, up to 5 digit amounts. Plasma cutting nozzles at such capacities are very expensive, it can go up to RM150 per nozzle, which is not cost effective compared to oxy/gas cutting.
2. WHAT IS THE MOST QUALITY CUTTING NOZZLE? We highly recommend Koike 106D7 LPG gas cutting nozzles, it is the best cutting nozzle available in the market, it can cut faster than other nozzles and can cut less than 2 degree bevel with very little slag. For economical nozzle that cuts slower without compromising quality, we recommend Koike 106HC LPG gas cutting nozzle..
3. WHY USE LPG GAS? LPG Gas is also cooking gas that is used at your home. It is far more affordable than Acetylene, and does not produce black dusty carbons during cutting. The carbon residue can cause nozzle blockage, meaning you have to frequently stop the production to clean the nozzle all the time.
4. I DO NOT KNOW HOW TO USE OXY/GAS CUTTING, HOW? No worries, we will train you on how to cut with CNC OXY/GAS CUTTING. We will also indicate correct pressures on knobs and gauges so there is a reference for you.
5. WHAT IS THE DIFFERENCE BETWEEN OXY/GAS AND PLASMA CUTTING? Oxy/gas cutting is limited to mild steel and carbon steel, but can cut very thick metals economically with very little bevel. Plasma cutting can cut mild steel, stainless steel and aluminum, but only economical and affordable for less than 6mm cutting. As quality and high definition plasma cutters are mostly manufactured in USA, our currency exchange rate is causing the price of the plasma cutters and their consumables to increase. Therefore we always recommend our customers to go for 0.5mm to 5mm thickness in plasma cutting, and any cutting above that will be oxy/gas cutting. Should you want to cut thicker than 6mm for plasma cutting, please inform us, and we will try our best to work out the cost for a good plasma cutter.
6. IS THE CNC HARD TO USE? Most of our customers use foreign labor to operate our cutting machines, while they use local labor for cutting file preparation. We also provide training to foreign labors from Bangladesh, Indonesia, Myammar, Burma, etc. Just ensure that they know some form of English/Malay, and knows how to use computer/smartphone! Our training takes less than 4 hours only! It's a very straight-forward and simplified procedure. We also provide operation manuals just in case your operator does not remember how to use.
PRICING:
- 4' x 4' : RM38,800.00
- Other sizes please inquire us at +6016 677 8469 (Mr Teh)
Have a question? Contact Mr Teh at +6 016-677 8469!
MACHINE TECHNICAL SPECIFICATIONS:
- Machine Dimension: W1800mm x L2700mm x H1300mm
- Cutting Area: W1220mm x L1220mm (4' x 4')
- Oxy / Gas Torch Travel: 100mm
- Oxy / Gas Cutting Thickness Range: 6mm to 50mm (depending on the nozzle installed)
- Positional Accuracy: ±0.2mm
- Supported Graphical Files: DXF from AUTOCAD, SOLIDWORKS, CORELDRAW, ILLUSTRATOR
COMES WITH (We supply the following):
- MYCUT CNC Cutting Machine
- MYCUT CNC Computer System (Integrated into CNC Cutting Machine)
- CNC Oxy/Gas Torch Module, installed with Cutting Nozzle
- 1 Day Installation and Training (Yes, the training is very easy and straight forward)
- After Sales Support
- 1 Year Manufacturer Limited Warranty
- Operator Manual
CUSTOMER PREPARATION REQUIREMENTS (These are the things you need to prepare):
- POWER SUPPLY: 3 Phase 415VAC, 20A
- OXY GASES: Min 14kg LPG (Cooking Gas) and 99.9% Oxygen Gas with Pressure Regulator
- WORKSPACE: Minimum 2 feet more than the machine dimension, of course the larger the better.
- MACHINE OPERATOR: Any person with basic computer/smartphone understanding and English/Malay language, is sufficient for operating our CNC machine.
- (OPTIONAL, FOR PLASMA) GROUNDING: 10 feet copper rod grounded to earth, after grounding measure ground resistance to machine body is less than 5 ohms.
Note: We reserve the right to change the details of the product without prior notice. Contact us for an accurate pricing.